{"title":"Carbon Adjustable Spreaders for Dinghies","description":"\u003cp\u003eSeldén carbon fully adjustable spreader sets for dinghy masts, available in standard 35-degree and high-sweep 40-degree versions across lengths from 300mm to 520mm — the same thumbscrew adjustment system as the aluminium range at reduced weight for performance-focused classes.\u003c\/p\u003e\n\u003ch2\u003eHow to choose\u003c\/h2\u003e\n\u003cp\u003eThe carbon fully adjustable spreader sets use the same adjustment mechanism as the aluminium fully adjustable range: moulded thumbscrews set the angle in 1-degree increments, with a detent pin to lock the setting. The carbon tube reduces weight compared to the aluminium version, which matters on performance dinghies where spar weight affects mast bend characteristics and overall boat weight.\u003c\/p\u003e\n\u003cp\u003eThe standard 35-degree range adjusts from 0 to 35 degrees and covers lengths from 300mm to 500mm. The high-sweep 40-degree range adjusts from 10 to 40 degrees and is available at 300mm, 350mm, 375mm, 400mm, 450mm and 520mm for classes requiring more sweep. Both ranges use the same spreader brackets as the aluminium fully adjustable system — the carbon tube is a direct drop-in replacement on the same bracket.\u003c\/p\u003e\n\u003cp\u003eConfirm the correct length and sweep angle with your class association or tuning guide before ordering. Changing spreader length or angle affects shroud geometry and rig loads and may affect class legality.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in this collection\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon standard 35-degree spreader sets\u003c\/strong\u003e are available in 300mm (503-800-01), 325mm (503-801-01), 350mm (503-802-01), 375mm (503-803-01), 400mm (503-804-01), 425mm (503-805-01), 450mm (503-806-01), 475mm (503-807-01) and 500mm (503-808-01). Each set is supplied complete with two carbon spreaders, thumbscrew adjusters, detent pins and all fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon high-sweep 40-degree spreader sets\u003c\/strong\u003e are available in 300mm (503-810-01), 350mm (503-812-01), 375mm (503-813-01), 400mm (503-814-01), 450mm (503-816-01) and 520mm (503-819-01). These suit classes requiring angle adjustment from 10 to 40 degrees.\u003c\/p\u003e\n\u003cp\u003eSpreader brackets for the fully adjustable system are section-specific and are listed in the Fully Adjustable Spreaders collection. The same brackets are used with both aluminium and carbon spreader tubes.\u003c\/p\u003e","products":[{"product_id":"carbon-fully-adjustable-complete-spreader-set-300mm-standard-35-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 300mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of carbon fibre spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143083651410,"sku":"503-800-01","price":537.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_3e58399e-678a-4b5a-82da-77cbb42483c8.jpg?v=1764240334"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-325mm-standard-35-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 325mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of carbon fibre spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143084110162,"sku":"503-801-01","price":537.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_5ce8c4d1-0262-4e1a-ab7d-532b997a9322.jpg?v=1764240351"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-350mm-standard-35-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 350mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of carbon fibre spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143084175698,"sku":"503-802-01","price":537.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_e6af8ad4-7bd1-409e-9644-34eb6e205588.jpg?v=1768989074"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-375mm-standard-35-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 375mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of carbon fibre spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143084208466,"sku":"503-803-01","price":537.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_7adaf8b0-e8d0-4fea-90a7-2b46b12226e4.jpg?v=1764240354"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-400mm-standard-35-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 400mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of carbon fibre spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143084667218,"sku":"503-804-01","price":537.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_1f9eb8d0-f330-4367-be08-61be533a553d.jpg?v=1764240369"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-425mm-standard-35-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 425mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of carbon fibre spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143084699986,"sku":"503-805-01","price":537.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_f85faf96-a88d-48f2-9f0a-37eb50438eb6.jpg?v=1764240370"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-450mm-standard-35-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 450mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of carbon fibre spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143084765522,"sku":"503-806-01","price":537.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_1e1db003-aade-4e4b-804e-51abd2c2451c.jpg?v=1764240372"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-475mm-standard-35-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 475mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of carbon fibre spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143085125970,"sku":"503-807-01","price":537.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_b9148ecb-8c7e-4953-9fb1-1661f380749d.jpg?v=1764240387"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-500mm-standard-35-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 500mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of carbon fibre spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143085158738,"sku":"503-808-01","price":537.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_15c18c6e-0971-4008-9f88-ca335173a04b.jpg?v=1764240389"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-300mm-40-high-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 300mm, 40° High Sweep","description":"\u003cp\u003eComplete set of carbon spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143085224274,"sku":"503-810-01","price":994.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_db723b9f-7cdd-4f71-93a2-6c64010a8ac3.jpg?v=1769091380"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-350mm-40-high-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 350mm, 40° High Sweep","description":"\u003cp\u003eComplete set of carbon spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143085486418,"sku":"503-812-01","price":994.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_9b916667-993b-4646-81ae-8d41016dce6b.jpg?v=1769091382"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-375mm-40-high-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 375mm, 40° High Sweep","description":"\u003cp\u003eComplete set of carbon spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143085519186,"sku":"503-813-01","price":994.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_63cf730f-2627-42c3-87d4-4f31d94c9374.jpg?v=1769091383"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-400mm-40-high-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 400mm, 40° High Sweep","description":"\u003cp\u003eComplete set of carbon spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143085945170,"sku":"503-814-01","price":994.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_2a9c6491-0c8e-40f9-97d5-78bdab9a4aa4.jpg?v=1769091385"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-450mm-40-high-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 450mm, 40° High Sweep","description":"\u003cp\u003eComplete set of carbon spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143086207314,"sku":"503-816-01","price":994.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_f7c0b2df-7038-4833-afd1-9b057cbdbd8b.jpg?v=1769091387"},{"product_id":"carbon-fully-adjustable-complete-spreader-set-520mm-40-high-sweep","title":"Carbon Fully Adjustable Complete Spreader Set, 520mm, 40° High Sweep","description":"\u003cp\u003eComplete set of carbon spreaders to suit the Seldén fully adjustable system for ultimate light weight and bend control. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143087714642,"sku":"503-819-01","price":935.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_2ec8cdc8-6f31-4138-a34f-736b3abc98d5.jpg?v=1769091389"}],"url":"https:\/\/dinghy.seldenmast.com\/collections\/carbom-adjustable-spreaders.oembed","provider":"Seldén Dinghy Store","version":"1.0","type":"link"}