{"title":"Fully Adjustable Spreaders for Dinghies","description":"\u003cp\u003eSeldén fully adjustable aluminium spreader sets for dinghy masts, available in standard 35-degree and high-sweep 40-degree versions across lengths from 300mm to 480mm, with thumbscrew angle adjustment in 1-degree increments and matching section-specific mast brackets.\u003c\/p\u003e\n\u003ch2\u003eHow to choose\u003c\/h2\u003e\n\u003cp\u003eThe fully adjustable spreader system uses moulded thumbscrews to set the angle from 0 to 35 degrees in 1-degree increments on the standard version, or from 10 to 40 degrees on the high-sweep version. A detent pin locks the angle once set. The adjusters are handed port and starboard so that turning forward increases the angle forward, making on-the-water adjustment intuitive. Adjustment threads are self-lubricating.\u003c\/p\u003e\n\u003cp\u003eChoose the spreader length that your class rules specify or that your tuning guide recommends. Lengths available in the standard 35-degree range are 325mm, 350mm, 375mm, 400mm, 425mm, 450mm, 475mm and 480mm. The high-sweep 40-degree range covers 300mm, 325mm, 375mm, 400mm, 450mm and 475mm for classes that require more sweep than the standard system provides.\u003c\/p\u003e\n\u003cp\u003eThe spreader bracket must match your mast section. Three brackets are available: one for Zeta\/Cumulus\/Alto\/Epsilon\/Gamma sections (522-144-01), one for Lambda\/Kappa and S3 sections (522-145-01) and one for Kappa\/D+ and Lambda sections (522-146-01). Contact Seldén before fitting any spreader bracket to a carbon mast. Always confirm spreader length and angle with your class association before making changes, as these affect shroud geometry and rig loads.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in this collection\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eStandard 35-degree fully adjustable aluminium spreader sets\u003c\/strong\u003e are available in 325mm (503-192-01), 350mm (503-193-01), 375mm (503-194-01), 400mm (503-195-01), 425mm (503-196-01), 450mm (503-197-01), 475mm (503-198-01) and 480mm (503-199-01). Each set is supplied complete with two black anodised aluminium spreaders, thumbscrew adjusters, detent pins and all fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-sweep 40-degree fully adjustable aluminium spreader sets\u003c\/strong\u003e are available in 300mm (503-221-01), 325mm (503-222-01), 375mm (503-224-01), 400mm (503-225-01), 450mm (503-227-01) and 475mm (503-228-01). These are designed for classes that require more sweep than the standard range allows, adjusting from 10 to 40 degrees in 1-degree increments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpreader brackets\u003c\/strong\u003e for the fully adjustable system are section-specific. The bracket for Zeta\/Cumulus\/Alto\/Epsilon\/Gamma sections (522-144-01) and the bracket for Lambda\/Kappa and S3 sections (522-145-01) are supplied with rivets and clevis pins. The bracket for Kappa\/D+\/Lambda sections (522-146-01) covers the overlap between those sections. Contact Seldén before fitting any bracket to a carbon mast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetent pins\u003c\/strong\u003e for locking spreader angle are available in three sizes: ø3 x 22mm (166-383) for fully adjustable spreader systems, ø5 x 24mm (166-384) for vernier shroud adjusters and ø6 x 60mm (166-581) for fast stay adjustment.\u003c\/p\u003e","products":[{"product_id":"fully-adjustable-complete-spreader-set-325mm-standard-35-sweep","title":"Fully Adjustable Complete Spreader Set, 325mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143075623250,"sku":"503-192-01","price":248.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_8d8679b7-9444-4098-82eb-d21c377647d9.jpg?v=1765193170"},{"product_id":"fully-adjustable-complete-spreader-set-350mm-standard-35-sweep","title":"Fully Adjustable Complete Spreader Set, 350mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143076311378,"sku":"503-193-01","price":258.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_81982544-bb0d-41bf-bad5-09c2389a4b6b.jpg?v=1765193172"},{"product_id":"fully-adjustable-complete-spreader-set-375mm-standard-35-sweep","title":"Fully Adjustable Complete Spreader Set, 375mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eColour\u003c\/b\u003e: Black \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143076376914,"sku":"503-194-01","price":261.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_51f4f4f2-a19f-4150-a24c-c596887dcb53.jpg?v=1765193174"},{"product_id":"fully-adjustable-complete-spreader-set-400mm-standard-35-sweep","title":"Fully Adjustable Complete Spreader Set, 400mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eColour\u003c\/b\u003e: Black \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143076442450,"sku":"503-195-01","price":272.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_9e416bd1-f0ae-4849-8dd2-48c4adabaa63.jpg?v=1765193176"},{"product_id":"fully-adjustable-complete-spreader-set-425mm-standard-35-sweep","title":"Fully Adjustable Complete Spreader Set, 425mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eColour\u003c\/b\u003e: Black \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143076475218,"sku":"503-196-01","price":249.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_1b2999ed-aed3-4548-a9d9-90b0cd7780a9.jpg?v=1765193178"},{"product_id":"fully-adjustable-complete-spreader-set-450mm-standard-35-sweep","title":"Fully Adjustable Complete Spreader Set, 450mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eColour\u003c\/b\u003e: Black \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143076901202,"sku":"503-197-01","price":278.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_c08967bb-5951-4192-a13f-ba14a0aba40b.jpg?v=1765193179"},{"product_id":"fully-adjustable-complete-spreader-set-475mm-standard-35-sweep","title":"Fully Adjustable Complete Spreader Set, 475mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eColour\u003c\/b\u003e: Black \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143076966738,"sku":"503-198-01","price":289.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_5d4d38d9-c5fc-4cf9-aec3-c6da974c2cd7.jpg?v=1765193181"},{"product_id":"fully-adjustable-complete-spreader-set-480mm-standard-35-sweep","title":"Fully Adjustable Complete Spreader Set, 480mm, Standard 35° Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Moulded thumbscrews allow fast and precise adjustment from 0 to 35 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eColour\u003c\/b\u003e: Black \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143077032274,"sku":"503-199-01","price":330.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_0ad1259f-c86d-42cd-b182-0fcad8b34888.jpg?v=1765193183"},{"product_id":"fully-adjustable-complete-spreader-set-300mm-40-high-sweep","title":"Fully Adjustable Complete Spreader Set, 300mm, 40° High Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143077163346,"sku":"503-221-01","price":238.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_5d1139b2-a90f-4459-bc15-1f3ab380ebe8.jpg?v=1769091375"},{"product_id":"fully-adjustable-complete-spreader-set-325mm-40-high-sweep","title":"Fully Adjustable Complete Spreader Set, 325mm, 40° High Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143077622098,"sku":"503-222-01","price":156.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_8b30000a-dfa6-42e6-92c2-e888d77dd60c.jpg?v=1769091376"},{"product_id":"fully-adjustable-complete-spreader-set-375mm-40-high-sweep","title":"Fully Adjustable Complete Spreader Set, 375mm, 40° High Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143077687634,"sku":"503-224-01","price":197.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_213b2d17-0b08-4066-a367-617a6deddaa2.jpg?v=1769091378"},{"product_id":"fully-adjustable-complete-spreader-set-400mm-40-high-sweep","title":"Fully Adjustable Complete Spreader Set, 400mm, 40° High Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143077753170,"sku":"503-225-01","price":272.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_2424e254-0a78-4458-989f-60cb4b2f3b08.jpg?v=1769091379"},{"product_id":"fully-adjustable-complete-spreader-set-450mm-40-high-sweep","title":"Fully Adjustable Complete Spreader Set, 450mm, 40° High Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143077785938,"sku":"503-227-01","price":142.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_1c2d9801-765c-4674-bd27-5194945d27c1.jpg?v=1769091066"},{"product_id":"fully-adjustable-complete-spreader-set-475mm-40-high-sweep","title":"Fully Adjustable Complete Spreader Set, 475mm, 40° High Sweep","description":"\u003cp\u003eComplete set of black anodised aluminium spreaders to suit the Seldén fully adjustable system. Designed for classes that require more spreader angle or sweep than is usual, the moulded thumbscrews allow fast and precise adjustment from 10 to 40 degrees in 1 degree increments. A detent pin is provided to lock the angle if required. The adjusters are handed port and starboard for simple 'turn forward to angle forward' function. Adjustment threads are self lubricating for reduced friction. The spreader ends incorporate 2 wire slots to tightly grip 2.5mm and 3.0mm wire. This allows the dihedral angle to be secured so the spreader disects the shroud at the same angle, above and below the adjuster. Spreader length can be adjusted in 5mm increments. Supplied complete with 2 spreaders, thumbscrew angle adjusters, length adjusters, clevis pins, detent angle locking pins and rigging screw oil for initial lubrication.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143078211922,"sku":"503-228-01","price":117.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_d281d0e7-faef-4019-8982-333456b4bc3d.jpg?v=1769091067"},{"product_id":"spreader-bracket-for-fully-adjustable-spreaders","title":"Spreader Bracket For Fully Adjustable Spreaders","description":"\u003cp\u003eSpreader bracket for use only with Seldén fully adjustable spreader system. Fits Zeta, Cumulus, Alto, Epsilon and Gamma section spars. Supplied complete with rivets and clevis pins to attach spreaders.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143113011538,"sku":"522-144-01","price":114.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_cd14bd78-f43c-4beb-8c96-bc964417de7f.jpg?v=1764241022"},{"product_id":"spreader-bracket-for-fully-adjustable-spreaders-3","title":"Spreader Bracket For Fully Adjustable Spreaders","description":"\u003cp\u003eSpreader bracket for use only with Seldén fully adjustable spreader system. Fits Lamda, Kappa and S3 section spars. Supplied complete with rivets and clevis pins to attach spreaders. Please contact Seldén before fitting to a Seldén carbon mast.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143113044306,"sku":"522-145-01","price":108.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_0852bee8-9414-43c4-86e1-499fb21aee75.jpg?v=1770825966"},{"product_id":"spreader-bracket-for-vernier-adjustable-spreaders-4","title":"Spreader Bracket For Vernier Adjustable Spreaders","description":"\u003cp\u003eSpreader bracket for use only with Seldén fully adjustable spreader system. Fits Kappa, D+ and Lamda section spars. Supplied complete with rivets and clevis pins to attach spreaders. Please contact Seldén before fitting to a Seldén carbon mast.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52143113077074,"sku":"522-146-01","price":155.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_8e72c2b4-58e7-4177-9381-eacc5997478b.jpg?v=1764241026"},{"product_id":"detent-type-fast-pin-o3-x-22mm","title":"Detent Type Fast Pin, Ø3 X 22mm","description":"\u003cp\u003eDetent pin commonly used in fully adjustable dinghy spreader systems.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52547149529426,"sku":"166-383","price":6.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_0dea1757-7c59-4de9-bb3b-6edad3f45a72.jpg?v=1769171171"},{"product_id":"detent-type-fast-pin-o5-x-24mm","title":"Detent Type Fast Pin, Ø5 X 24mm","description":"\u003cp\u003e Detent pin commonly used in vernier shroud adjusters.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52547151888722,"sku":"166-384","price":20.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_c5be4624-1e70-4ca4-b8bd-c7c3a736090a.jpg?v=1769171173"},{"product_id":"detent-type-fast-pin-o6-x-60mm","title":"Detent Type Fast Pin, Ø6 X 60mm","description":"\u003cp\u003e Detent pin commonly used for fast stay adjustment.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Selden Dinghy Store","offers":[{"title":"Default Title","offer_id":52547227287890,"sku":"166-581","price":9.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/1325\/4738\/files\/index_e72d119c-7416-4c86-8851-83f213e2f0cd.jpg?v=1769171467"}],"url":"https:\/\/dinghy.seldenmast.com\/collections\/fully-adjustable-spreaders.oembed","provider":"Seldén Dinghy Store","version":"1.0","type":"link"}